Grand Prix V6-3.8L (2007)
Control Arm Bushing: Service and Repair
Front Lower Control Arm Bushing Replacement (Vertical)
Tools Required
* J 21474-01 Control Arm Bushing Set
-
J 21474-271/2 Inch Puller Bolt Thrust Bearing
-
J 21474-2Bushing Installer Remover
-
J 21474-4Nut
-
J 21474-13 Control Arm Bushing Installer
*
J 23444-A High Pressure Lubricant
*
J 34126 Driven Sprocket Support Bearing Installer
*
J 35379 Front Knuckle Support
Removal Procedure
1. Remove the lower control arm.
2. Secure the lower control arm in a vice.
3. Mark the lower control arm along the flat edge of the bushing flange.
Important: Apply J 23444-A or equivalent to the threads of J 21474-27.
4. Assemble the following bushing removal tools as shown:
1. J 21474-27
2. J 21474-13
3. J 34126
4. J 35379
5. J 21474-2