Grand Prix V6-3.8L (2007)
1. Install the transaxle brace (2).
2. Hand start the bolts to the engine and to the transaxle.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the transaxle brace bolts (3) to the transaxle.
Tighten the bolts to 43 N.m (32 lb ft).
4. Install the transaxle brace bolts (1) to the engine.
Tighten the bolts to 63 N.m (46 lb ft).
5. Install the oil filter adapter.
6. Install the right front tire and wheel.
7. Lower the vehicle.
8. Connect the battery ground (negative) cable.