Grand Prix V6-3.8L (2007)
1. Position the transaxle bracket to the transaxle.
2. Hand start the transaxle mount bracket to transaxle bolts.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the transaxle bracket bolts.
Start with the forward lower bolt and work clockwise to tighten the transaxle bracket bolts to 95 N.m (70 lb ft).
4. Remove the support from the transaxle.
5. Install the transaxle bracket to the transaxle mount upper nuts.
Tighten the nuts to 47 N.m (35 lb ft).
6. Install the left engine splash shield.
7. Install the left front tire and wheel.