Grand Prix V6-3.8L SC VIN 1 (1997)
7. Tires and wheels.
-
Align previous marks on wheel and hub and bearing.
8. Lower vehicle.
9. Fill master cylinder to proper level with clean brake fluid.
10. Apply brake pedal three times to seat pads against rotor.
11. Burnish brake pads and rotors. Refer to "BURNISHING BRAKE PADS AND ROTORS."
Burnishing Brake Pads and Rotors
After brake pads have been replaced and/or rotors have been refinished, it is recommended that the new braking surface be broken in, or "burnished".
This can be accomplished by making 20 stops from 48 km/h (30 mph) using medium to firm pressure. Take care to avoid overheating the brakes.
