Grand Prix V6-3.8L SC VIN 1 (1997)
2. Parking brake shoe and lining.
A. Position shoe and lining on backing plate.
B. Using J 38400, pull end of return spring up and rest on web of brake shoe.
C. Using J 38400, pull end of return spring over until it snaps in slot in brake shoe.
3. Parking brake lever to parking brake shoe and lining.
4. Parking brake cable to parking brake lever, if disconnected.
Clean
-
Before reinstalling, adjusting screw must be disassembled and thoroughly cleaned and lubricated.
A. Clean adjuster screw threads with a wire brush.
B. Wash all components in clean denatured alcohol.
C. Apply GM P/N 1052196 or equivalent brake lubricant to the adjuster screw threads, inside diameter of adjuster socket and socket face.
D. Adequate lubrication is achieved when a continuous bead of lubricant is on end of adjuster nut and socket when threads are fully engaged.
Inspect
-
Threads of adjuster screw for smooth rotation over full length.
5. Adjusting screw and adjuster shoe and lining.
