Grand Prix V6-3.8L SC VIN 1 (1997)
6.
See the illustration. Apply a continuous 1/4 inch bead of 5900 RTV sealant, P/N 12346286, on the top of the new gasket. Apply RTV sealant
directly over the gasket's raised sealing bead.
7.
Install the oil pan gasket and windage tray assembly to the cylinder block. RTV will hold assembly in place temporarily.
8.
Install the oil pump pipe and screen assembly.
Tighten
Tighten the oil pump pipe and screen bolts to 15N.m (11 lb.ft).
9.
See the illustration. Apply a continuous 1/4 inch bead of 5900 RTV sealant, P/N 12346286, to the bottom of the new gasket. Apply the RTV
sealant directly over the gasket's raised sealing bead.
10.
Install the oil pan on the engine.
Tighten
Tighten the oil pan retaining bolts to 14 N.m (124 lb in).
11.
Follow the remaining oil pan installation instructions found in the Engine Mechanical section of the Service Manual.
12.
Before adding engine oil, allow the RTV to set for 30 minutes.
13.
Add the proper amount of engine oil, then verify on the dipstick.
14.
Run the engine and verify the repair.
