Grand Prix V6-3.8L SC VIN 1 (1997)
Air Bag Control Module: Service and Repair
Repair of Mounting Studs and/or Bracket
First Repair
IMPORTANT
The following procedures should be utilized in the event that Sensing and Diagnostic Module (SDM) mounting holes or fasteners are damaged to the
extent that the SDM can no longer be properly mounted.
FIRST REPAIR
1. Remove stripped fastener and discard.
2. Attach SDM with new fastener (GM P/N 10156138)
TIGHTEN
^
Fastener to 10.0 N.m (89 lb. in.).
Second Repair
IMPORTANT
The following procedures should be utilized in the event that Sensing and Diagnostic Module (SDM) mounting holes or fasteners are damaged to the
extent that the SDM can no longer be properly mounted.
SECOND REPAIR
1. Remove stripped fastener and discard.
2. Use a larger fastener (GM P/N 10267482) with washer (GM P/N 11500305).
TIGHTEN
^
Fastener to 15.0 N.m (134 lb. in.).
Use hand tools only to achieve fastener torque.
This will prevent stripping of the replacement fastener.