Grand Prix V6-3.8L SC VIN 1 (1997)
Power Steering Pump: Service and Repair
Power Steering Pump Pulley Replacement
^
Tools Required:
-
J 25034-B Power Steering Pump Pulley Remover (Base ONLY)
-
J 37609 Screw
-
J 25033-B Power Steering Pump Pulley Installer Remover OR
-
J 37609-A Power Steering Pump Pulley
-
J 36015 Power Steering Pump Pulley Installer
-
Or Equivalents
REMOVE OR DISCONNECT
1. Drive belt.
2. Pump from engine for clearance.
3. Pump pulley using J 25034-B (Base ONLY) with J 37609 or J 37609-A.
INSTALL OR CONNECT
1. Pump pulley using J 25033-B or J 36015.
Important:
^
Face of pulley hub must be flush with end of pump driveshaft.
^
Do not use a press to install pulley.
2. Pump to engine.
3. Accessory drive belt.
4. Bleed power Steering system.
^
Inspect for leaks.