Grand Prix V6-3.8L SC VIN 1 (1997)
The manufacturer will call out those fasteners that require a replacement after removal. The manufacturer will also call out the fasteners that require
thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or other corrosion inhibitors)
on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and the joint clamping force, and may
damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these instructions can help you
avoid damage to parts and systems.
1. Insert the automatic transaxle range selector lever cable thru the dash from the engine compartment side.
2. Automatic transaxle range selector lever cable to automatic transaxle range selector lever cable bracket.
3. Automatic transaxle range selector lever cable to automatic transaxle range selector lever.
4. Automatic transaxle range selector lever cable to wiring harness clip or strap.
5. Air cleaner duct. Refer to POWERTRAIN MANAGEMENT.
6. Automatic transaxle range selector lever cable to.
-
Shift control.
-
Column.
Adjust
-
Transaxle side automatic transaxle range selector lever cable.
