Grand Prix V6-3.8L SC VIN 1 (1997)
10. Position cage (20) and inner race (19) 90° to centerline of outer race (21) and align cage windows with lands of outer race.
11. Cage (20) and inner race (19) from outer race (21).
12. Rotate inner race (19) 90° to centerline of cage (20) with lands of inner race aligned with windows of cage.
13. Pivot inner race (19) into cage (20) window and remove inner race.
Clean
-
Clean inner and outer race assemblies, cage and balls thoroughly with clean solvent. All traces of old grease and any contaminates must be
removed. Dry all parts.
ASSEMBLE
1. New swage ring (13) on neck of seal (15). Do not swage.
2. Slide seal (15) onto axleshaft (14) end position neck of seal in seal groove on axle shaft (14). The largest groove below the sight groove on the
axle shaft is the seal groove.
