Grand Prix V6-3.8L VIN 2 (2004)
5.5.
Install the terminal position assurance (TPA).
5.6.
Install the terminal cover.
6.
On the body harness I/P connector (gray):
6.1.
Remove the terminal cover.
6.2.
Remove the terminal position assurance (TPA).
6.3.
Relocate the 1999 circuit from cavity D8 to cavity C1.
6.4.
Relocate the 599 circuit from cavity B6 to cavity A2.
6.5. Install the terminal position assurance (TPA).
6.6.
Install the terminal cover.
7.
Seat the bottom junction block tabs and snap the top of the junction block to the passenger knee bolster.
8.
Install the junction block bolt.
Tighten
Tighten the junction block bolt to 10 N.m (89 lb in).
9.
Connect the I/P wiring harness to the accessory wiring junction block.
Tighten
Tighten the connector bolt to 2.5 N.m (22 lb in).
10.
Connect the body wiring harness to the accessory wiring junction block.
Tighten
Tighten the connector bolt to 2.5 N.m (22 lb in).
11.
Install the I/P compartment.
Warranty Information