Grand Prix V6-3.8L VIN 2 (2004)
Front Door Exterior Handle: Service and Repair
Door Handle Components
Door Handle Rod Replacement - Front Outside
Removal Procedure
1. Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (See: Front Door Panel/Service and Repair) .
2. Remove the front door water deflector. Refer to Water Deflector Replacement - Front Door See: Front Door Panel/Service and Repair
3. Raise the window to the full upright position.
Notice: Refer to Paint Damage Notice in Cautions and Notices.
4. Apply masking tape around the outside door handle.
5. Open the outside handle rod to lock clip located on the door lock.
The outside handle rod should be loose from the lock.
6. Remove the outside door handle. Refer to Door Handle Replacement - Front Outside (See: Door Handle Replacement) .
7. Remove the outside handle (1) and the rod (2) from the door.
Installation Procedure
1. Install the outside handle (1) and rod (2) to the door.
2. Install the outside door handle. Refer to Door Handle Replacement - Front Outside (See: Door Handle Replacement) .
