Grand Prix V6-3.8L VIN 2 (2004)
1. Position the cover in the pull handle.
2. Press firmly to secure the cover.
Pull Handle Replacement
Pull Handle Replacement
Removal Procedure
1. Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door. See: Refer to Trim Panel Replacement - Side Rear Door. See:
Rear Door/Rear Door Panel/Service and Repair
2. Pull back the insulating material to access the pull handle housing screws.
3. Remove the pull handle housing retaining screws.
4. Remove the pull handle.
Installation Procedure
1. Position the pull handle to the door trim panel.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the pull handle housing screws.
Tighten the screws to 3 N.m (27 lb in).
3. Install the door trim panel. Refer to Trim Panel Replacement - Side Front Door (See: ) and to Trim Panel Replacement - Side Rear Door. See:
Rear Door/Rear Door Panel/Service and Repair
Water Deflector Replacement - Front Door
Water Deflector Replacement - Front Door
Removal Procedure
