Grand Prix V6-3.8L VIN 2 (2004)
Front Door Window Regulator: Service and Repair
Door Window Regulator Replacement (Manual)
Window Regulator Replacement - Front Door
Removal Procedure
1. Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (See: Front Door Panel/Service and Repair) .
2. Remove the front door water deflector. Refer to Water Deflector Replacement - Front Door See: Front Door Panel/Service and Repair
3. Raise the window far enough in order to gain access through the inner door panel to the window guide channel to window bolts.
4. Remove the bolts (2) that attach the window guide channel to the window .
5. Raise the window to the full up position and tape in place.
6. Disconnect the electrical connector (2) from the power window motor by pulling out on the tab (1).
7. Loosen the bolt on the window regulator motor (5).
8. Lift the motor free of the retaining slot.
9. Remove the bolts from the front door window regulator (1, 2, 3, 4).
10. Remove the window regulator and motor through the access opening in the inner door panel.
11. Remove the power window motor from the window regulator. Refer to Window Regulator Motor Replacement - Front Door (See: Front Side
Door Window Regulator Motor Replacement) .
Installation Procedure