Grand Prix V6-3.8L VIN 2 (2004)
Important: The adhesive has a 40-50 minute working time. Do not allow the door to totally cure off the vehicle, as proper alignment of
the door outer panel to the door shell will be difficult.
5. Apply a 3-6 mm (1/8 to 1/4 in) bead of metal panel bonding adhesive GM P/N 12378566/7 (Canadian P/N 88901674/5) or equivalent, to both of
the mating surfaces.
6. Using a small acid brush, spread a coat of adhesive to cover all the bare metal surfaces to ensure corrosion protection.
Important: Do NOT pull the panels apart after being joined together. Slide the panels against each other to realign the panels.
7. Install the door outer panel to the door shell.
8. Clamp the door outer panel into position as required.
