pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Door Window Channel|Page 8892 > < Door Window Channel|Page 8890
Page 3
background image

Notice:  Refer to Paint Damage Notice  in Cautions and Notices.

1. Apply masking tape to the door frame and applique.
2. Remove the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door  See: Rear Door Panel/Service and Repair
3. Remove the rear door water deflector. Refer to Water Deflector Replacement - Rear Door  (See: Rear Door Panel/Service and Repair) .
4. Position the window in the full down position.
5. Remove the window channel bolt (2).
6. Remove the window channel from the door.

Installation Procedure

1. Install the window channel (1) in the door.

Notice:  Refer to Fastener Notice  in Cautions and Notices.

2. Install the window run channel bolts (2).

Tighten the bolts to 10N.m (89 lb in).

3. Inspect the window for proper operation.
4. Remove the masking tape from the frame and applique.
5. Install the rear door water deflector. Refer to Water Deflector Replacement - Rear Door  (See: Rear Door Panel/Service and Repair) .
6. Install the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door  See: Rear Door Panel/Service and Repair

Door Window Channel|Page 8892 > < Door Window Channel|Page 8890