Grand Prix V6-3.8L VIN 2 (2004)
5. Remove the masking tape.
Lower the window far enough in order to gain access to the bolts (1) that attach the window to the regulator.
6. Install the bolts (1) that attach the window to the regulator.
Tighten the bolts to 10 N.m (89 lb in).
7. Connect the electrical connector (2) to the power window motor by pushing in on the tab (1).
8. Inspect the window for proper operation.
9. Install the rear door water deflector. Refer to Water Deflector Replacement - Rear Door (See: Rear Door Panel/Service and Repair) .
10. Install the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door See: Rear Door Panel/Service and Repair
