Grand Prix V6-3.8L VIN 2 (2004)
*
Both of the lower control arms. Refer to Lower Control Arm Replacement.
*
The stabilizer shaft. Refer to Stabilizer Shaft Replacement.
*
The spacers, the upper insulator, the lower insulator, and the retainers. Refer to Frame Cushion or Insulator Replacement - Front (See: Body /
Frame Mount Bushing/Service and Repair/Frame Cushion or Insulator Replacement - Front) or to Frame Cushion or Insulator Replacement -
Rear (See: Body / Frame Mount Bushing/Service and Repair/Frame Cushion or Insulator Replacement - Rear) .
Installation Procedure
1. If you are replacing the frame, install the following components:
*
Both of the lower control arms. Refer to Lower Control Arm Replacement.
*
The stabilizer shaft. Refer to Stabilizer Shaft Replacement.
*
The spacers, the upper insulator, the lower insulator, and the retainers. Refer to Frame Cushion or Insulator Replacement - Front (See: Body /
Frame Mount Bushing/Service and Repair/Frame Cushion or Insulator Replacement - Front) or to Frame Cushion or Insulator Replacement -
Rear (See: Body / Frame Mount Bushing/Service and Repair/Frame Cushion or Insulator Replacement - Rear) .
2. Position the engine support table with the frame under the vehicle.
3. Lower the vehicle to the frame.
4. Loosely install the bolts to secure the rear frame to the body.
