Grand Prix V6-3.8L VIN 2 (2004)
Notice: Refer to Fastener Notice in Cautions and Notices.
10. Install the floor console bolts. Adjust the front seats as required.
Tighten the bolts to 10 N.m (89 lb in).
11. Release the park brake.
Console Replacement - Overhead
Console Replacement - Overhead
Removal Procedure
1. Insert a flat-bladed tool at the left end of the lamp lens. Press in and down to free the lamp lens clip.
2. Pull down to remove the left lens.
3. Use the same procedure to remove the right lens.
4. Remove the overhead console screws.
