pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Glove Compartment Lock Cylinder > < Latch Replacement - IP Compartment|Page 9130
Page 1
background image

Glove Compartment Lock: Service and Repair
Striker Replacement - Instrument Panel (I/P) Compartment

STRIKER REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT

REMOVAL PROCEDURE

1. Open the instrument panel (I/P) compartment.
2. Remove the I/P compartment door latch striker screws.
3. Remove the I/P compartment door latch striker.

INSTALLATION PROCEDURE

NOTE:  Refer to Fastener Notice in Service Precautions.

1. Install the I/P compartment door latch striker and screws.

Tighten
Tighten the screws to 2 N.m (18 lb.in).

2. Close the I/P compartment.
3. Inspect the I/P compartment door for the proper alignment. Adjust the I/P compartment door latch striker as necessary.

Glove Compartment Lock Cylinder > < Latch Replacement - IP Compartment|Page 9130