Grand Prix V6-3.8L VIN 2 (2004)
1. Install the lamp/switch assembly (2) to the backplate.
2. Position the backplate (3) on the headliner.
3. Install the headliner harness connector (1) to the lamp/switch assembly (2).
4. Install the headliner. Refer to Headliner Replacement (See: Headliner/Service and Repair) .
5. Install the plastic screw housings and loosely install the screws in the handle.
Notice: Refer to Fastener Notice in Cautions and Notices.
6. Install the assist handle screws.
Tighten the screws to 2 N.m (18 lb in).
7. Slide the end covers into position and press up to install both end covers.
8. Install the lamp lens cover.
