Grand Prix V6-3.8L VIN 2 (2004)
3. If the vehicle is equipped with side curtain air bags do the following:
-
Pull on the garnish molding to disengage the retainer clip
-
Remove the tether strap from the front pillar.
4. Remove the garnish molding from the vehicle.
INSTALLATION PROCEDURE
1. Position the garnish molding to the windshield pillar.
IMPORTANT: The tether strap retains the garnish molding during airbag deployment. Make certain the tether retainers are fully inserted.
2. If equipped, install the tether strap to the front pillar.
