Grand Prix V6-3.8L VIN 2 (2004)
Power Door Lock Switch: Procedures
MIRROR, WINDOW, AND DOOR LOCK SWITCH REPLACEMENT
REMOVAL PROCEDURE
IMPORTANT: When removing a power window switch, the ignition switch must be in the OFF position. This will eliminate the possibility of
shorting out the power window switch when using a metal tool to remove the power window switch from the wiring harness.
1. Remove the door trim panel.
2. Disengage the electrical connectors from the following switches:
-
Rear compartment lid switch (1)
-
The power window switch (2)
-
The door lock switch (3)
-
The power mirror switch(4)
3. Remove the electrical harness from the trim panel.
4. Using a small, flat-bladed tool, remove the switches from the mounting bezel.
INSTALLATION PROCEDURE