Grand Prix V6-3.8L VIN 2 (2004)
Rear Door Window Glass Weatherstrip: Service and Repair
Door Window Channel
Window Channel Retainer Replacement - Rear Door
Window Channel Retainer Replacement - Rear Door
Removal Procedure
Notice: Refer to Paint Damage Notice in Cautions and Notices.
1. Apply masking tape to the door frame applique.
2. Remove the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door
Panel/Service and Repair
3. Remove the rear door water deflector. Refer to Water Deflector Replacement - Rear Door (See: Doors, Hood and Trunk/Doors/Rear Door/Rear
Door Panel/Service and Repair) .
4. Remove the rear door window weatherstrip. Refer to Weatherstrip Replacement - Rear Door Window (See: Rear Door Weatherstrip/Service and
Repair) .
5. Position the window to the full down position.
6. Remove the screw (2) from the top corner of the inside door frame.
7. Remove the rear door inner belt sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Inner (See: ) .
8. Pull forward to release the rear door stationary window from the door frame. Refer to Window Replacement - Rear Door Stationary (See: Doors,
Hood and Trunk/Doors/Rear Door/Rear Door Window Glass/Service and Repair) .
9. Remove the rear door outer belt sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Outer (See: Door Window Sealing
Strip/Rear Door Window Belt Outer Sealing Strip Replacement) .
10. Remove the window channel weatherstrip by grasping the center and pulling downward to expose the rivets.
11. Drill out the 4 mm (5/32 in) rivets (2) along the inside edge of the window channel retainer (1).
12. Remove the window channel retainer from the door.
Installation Procedure
