Grand Prix V6-3.8L VIN 2 (2004)
12. Disconnect the park brake cable from the park brake lever on the brake caliper.
13. Remove the brake caliper bolts.
14. Remove the brake caliper.
Installation Procedure
1. If reusing the brake caliper retainers, clean the sleeves using denatured alcohol, or equivalent.
2. Lubricate the brake caliper pin bolts with a thin coat of high temperature silicone lube.
3. Install the brake caliper.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
4. Install the brake caliper pin bolts.
*
Tighten the brake caliper pin bolts to 27 Nm (20 ft. lbs.).
5. Remove the plugs in the brake hose end.
Important: Install NEW copper brake hose gaskets.
6. Assemble the brake hose bolt and the NEW copper brake hose gaskets to the brake hose.
7. Install the brake hose to caliper bolt to the brake caliper.
*
Tighten the brake hose to caliper bolt to 44 Nm (33 ft. lbs.).
8. Connect the park brake cable to the park brake lever on the brake caliper.
