Grand Prix V6-3.8L VIN 2 (2004)
Brake Caliper: Service and Repair
Brake Caliper Bracket Replacement
Front
Brake Caliper Bracket Replacement - Front
Removal Procedure
Caution:
Refer to Brake Dust Caution in Service Precautions.
See: Service Precautions/Technician Safety Information/Brake Dust Caution
Notice:
Support the brake caliper with heavy mechanic's wire, or equivalent, whenever it is separated from it's mount and the hydraulic flexible brake
hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which
may cause damage to the brake hose and in turn may cause a brake fluid leak.
1. Remove the caliper from the mounting bracket and support the caliper with heavy mechanics wire or equivalent. It is not necessary to disconnect
the hydraulic brake flexible hose from the caliper. Refer to Brake Caliper Replacement - Front.
2. Remove the front brake pads.
3. Remove the caliper bracket bolts (2).
4. Remove the caliper bracket (1).
Installation Procedure
Important: To ensure that the proper clamp load will be present when installed. It is imperative that the threads on the caliper bracket bolts, as well as
the mounting holes in the knuckle, be cleaned of all debris and inspected before proceeding with installation.
1. Clean and visually inspect threads of the caliper bracket bolts (2) and mounting holes in the knuckle.
2. Apply THREADLOCKER, GM P/N 12345493 (Canadian P/N 10953488) or equivalent, to the threads of the brake caliper bracket bolts (2).
