Grand Prix V6-3.8L VIN 2 (2004)
1. If reusing the brake caliper pin bolts, wipe away any debris and old lubricant with a with a clean shop cloth.
2. Apply lubricant, GM P/N 18047666, or equivalent, to the brake caliper pin bolts. Apply a thin layer to the pin bushing (2) and to the caliper pin
bolt shank (3, 4). Ensure that there is not a buildup of excess lubricant at the end of the leading caliper pin (1), in front of the bushing.
3. Install the caliper (2) over the rotor and onto the caliper bracket (3).
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
Important: The leading caliper pin, or top bolt, has a bushing as part of the assembly. The trailing caliper pin, or bottom bolt, is a solid design.
4. Install the caliper pin bolts (1). The leading caliper pin bolt, or top bolt, has a bushing as part of the assembly. The trailing caliper pin bolt, or
bottom bolt, is a solid design. Ensure that the bolt boots fit securely in the groove of the caliper pin bolts. If the boots are damaged, they must be