Grand Prix V6-3.8L VIN 2 (2004)
5. Disconnect the master cylinder brake pipes (1) from the BPMV (2).
6. Remove the 2 nuts (1) that connect the BPMV to the BPMV bracket.
Notice:
When removing the brake pressure modulator valve, protect the vehicle exterior from possible brake fluid spillage. Brake fluid can cause
damage to painted surfaces.
7. Remove the BPMV (2) and EBCM as an assembly from the vehicle.
8. Remove EBCM if replacing the BPMV only. Refer to Electronic Brake Control Module (EBCM) Replacement.
Installation Procedure
1. Install EBCM if replacing the BPMV only. Refer to Electronic Brake Control Module (EBCM) Replacement.