pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Park Brake Cable Replacement|Page 4884 > < Park Brake Cable Replacement
Page 2
background image

1. Install the front cable (1) into the vehicle.
2. Connect the cable to the parking brake lever. Ensure that the locking tabs are properly seated.

3. Install the cable button (1) in the lever clevis.
4. Install the cable button clip to the lever clevis.
5. Raise and suitably support the vehicle. Refer to Vehicle Lifting.

6. Tighten the nut on the equalizer in order to remove the slack in the cable.
7. Lower the vehicle.
8. Install the parking brake cable through the park brake cable guides.
9. Position the carpeting properly.

10. Install the lower center pillar trim panel on the left side. Refer to Trim Panel Replacement - Lower Center Pillar.
11. Install the left side carpet retainers. Refer to Carpet Retainer Replacement - Front.

Park Brake Cable Replacement|Page 4884 > < Park Brake Cable Replacement