Grand Prix V6-3.8L VIN 2 (2004)
16. Remove the right and left engine cooling fan motor bolts.
17. Remove the right and left engine cooling fan motor from the fan shroud.
18. Remove the transmission oil cooler line retaining clip from the bottom of the fan shroud.
19. Remove the cooling fan motors electrical harness retaining clips from the fan shroud.
20. Remove the cooling fan motor heat shield retainers.
21. Remove the cooling fan motor heat shield.
Installation Procedure
1. Install the right and left engine cooling fan motor to the fan shroud.
Notice: Refer to Fastener Notice in Service Precautions
2. Install the right and left cooling fan motor bolts.
^
Tighten the bolts to 6 Nm (53 in. lbs.).
