Grand Prix V6-3.8L VIN 2 (2004)
14. Install the bolt that connects the fan shroud to the condenser hold down bracket.
^
Tighten the bolts to 6 Nm (53 in. lbs.).
15. Install the radiator upper support brackets and bolts that connect to the fan shroud.
^
Tighten the bolts to 10 Nm (89 in. lbs.).
16. Install the PCM harness clip to the fan shroud.
17. Install the transmission oil cooler lines to the retainer clip at the bottom of the cooling fan shroud.
18. Install the air cleaner assembly.
19. Install the right and left engine mount struts.
20. Connect the negative battery cable.
21. Inspect cooling fan's for proper operation.
