Grand Prix V6-3.8L VIN 2 (2004)
1. Install the gasket and the water pump.
Notice: Refer to Fastener Notice in Service Precautions
2. Install the water pump bolts.
^
Tighten the long water pump bolts to 34 Nm (25 ft. lbs.).
^
Tighten the short water pump bolts to 22 Nm (16 ft. lbs.).
3. Install the water pump pulley.
4. Install the water pump pulley bolts.
^
Tighten the bolts to 13 Nm (115 in. lbs.).
5. Install the power steering pump.
6. Install the drive belt.
7. Install the accessory wiring junction block.
8. Fill the cooling system.
