Grand Prix V6-3.8L VIN 2 (2004)
1. Raise and support the vehicle.
2. Remove the tire and wheel.
3. Remove the engine splash shield.
4. Remove the motor mount to motor mount bracket nuts.
5. Remove the motor mount to frame nuts.
6. Using a suitable jackstand, raise the engine.
7. Remove the motor mount from the vehicle.
Installation Procedure
1. Position the motor mount on the frame
2. Use the jackstand to lower the motor mount bracket on to the motor mount.
Notice: Refer to Fastener Notice in Service Precautions
3. Install the motor mount to frame bolts.
^
Tighten the nuts to 47 Nm (35 ft. lbs.).
