Grand Prix V6-3.8L VIN 2 (2004)
4. Install the Motor mount to Motor mount bracket nuts.
^
Tighten the nuts to 47 Nm (35 ft. lbs.).
5. Install the engine splash shield.
6. Install the tire and wheel.
7. Lower the vehicle.
Engine Mount Strut Bracket - Upper Radiator Support
Removal Procedure
1. Remove the engine mount struts from the engine mount strut brackets at the upper radiator support.
2. Remove the 4 bolts from the engine mount strut bracket to the upper radiator support.
3. Remove the engine mount strut bracket from the upper radiator support.