Grand Prix V6-3.8L VIN 2 (2004)
2. Remove the engine coolant temperature sensor.
3. Remove the engine mount strut at the left engine mount strut bracket.
4. Remove the engine mount strut bracket bolts.
5. Remove the engine mount strut bracket.
Installation Procedure
1. Install the engine mount strut bracket to the head.
Notice: Refer to Fastener Notice in Service Precautions
2. Install the engine mount strut bracket bolts.
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Install the engine mount strut to the left engine mount strut bracket.
4. Install the engine coolant temperature sensor.
5. Fill the cooling system with engine coolant.
Engine Mount Strut Bracket Replacement - Right Lower
Removal Procedure