Grand Prix V6-3.8L VIN 2 (2004)
1. Disconnect the negative battery cable.
2. Remove the lower engine mount strut bracket bolts.
3. Remove the lower engine mount bracket nut.
4. Remove the lower engine mount bracket.
Installation Procedure
1. Install the lower engine mount bracket to the exhaust manifold stud and the upper engine mount strut bracket.
Notice: Refer to Fastener Notice in Service Precautions
2. Install the lower engine mount strut bracket bolts and nut.
^
Tighten the nut to 30 Nm (22 ft. lbs.).
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Connect the battery ground (negative) cable.
Engine Mount Strut Bracket Replacement - Right Upper
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the right engine mount strut at the upper engine mount strut bracket.