Grand Prix V6-3.8L VIN 2 (2004)
2. Install the upper engine mount strut bracket bolts.
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Install the fuel injector sight shield.
4. Install the lower engine mount strut bracket bolts.
^
Tighten the lower engine mount strut bracket nut.
^
Tighten the nut to 30 Nm (22 ft. lbs.).
^
Tighten the lower engine mount strut bracket bolts.
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
5. Install the right engine mount strut at the upper engine mount strut bracket.
6. Connect the negative battery cable.
Engine Mount Strut Replacement - Left
Removal Procedure
1. Remove the bolt and the nut from the left engine mount strut at the left engine mount strut bracket on the engine.
