Grand Prix V6-3.8L VIN 2 (2004)
6. Compress the valve spring using the J 38606.
7. Remove the valve locks.
8. Remove the valve spring and cap.
9. Remove the valve stem oil seal.
10. Inspect the valve spring for bent, cracked, or broken parts. Replace the valve spring if damaged.
Installation Procedure
Important:
^
Use hand pressure to install the valve stem oil seal.
^
The color of the replacement seal may not be the same color as the original seal. Install the seals in their correct location based on GM part and
package description. Make sure that the seal is fully seated on the valve guide.
