Grand Prix V6-3.8L VIN 2 (2004)
1. Place the oil seal over the stem until the seal begins to contact the valve guide.
2. Use the J 42863 to install the valve stem oil seal over the valve guide.
3. Install the J 38606 on the valve spring.
4. Compress the valve spring using the J 38606.
5. Install the valve spring and cap.
6. Install the valve locks.
7. Release the valve spring
Important: Ensure that the valve locks are seated.
8. Release the air pressure, and remove the J23590.
9. Install the spark plug.
10. Install the push rods and the valve rocker arms.
