Grand Prix V6-3.8L VIN 2 (2004)
9. Align the cogs on the crankshaft sprocket with the cogs on the oil pump gear set in the engine front cover.
10. Install the engine front cover to the engine.
11. Install the engine front cover bolts (1-7).
11.1.
Tighten the bolts to 20 Nm (15 ft. lbs.).
11.2.
Use the J 45059 to rotate the bolt an additional 40 degrees.
12. Install the crankshaft position sensor.
13. Install the crankshaft position sensor studs.
^
Tighten the studs to 30 Nm (22 ft. lbs.).
14. Install the oil pan-to-engine front cover bolts.
^
Tighten the oil pan bolts to 14 Nm (125 in. lbs.).
15. Install the oil level sensor.
^
Tighten the sensor to 20 Nm (15 ft. lbs.).
16. Connect the oil level sensor electrical connector.
