Grand Prix V6-3.8L VIN 2 (2004)
Important:
If Corporate Bulletin Number 03-08-57-006A was performed, it will be necessary to remove the strip of foam that was installed on the front
edge of the cowl.
7.
Discard the rubber water deflector.
8.
Install the new designed plenum water deflector.
9.
Install the air inlet grille panel.
10.
Install the push pins.
11.
Install the washer hose.
12.
Install the hood seal.
13.
Close the hood.
14.
Return the windshield wipers to the park position.
Parts Information
Parts are expected to be available from GMSPO on 3/2/05.
Warranty Information
