Grand Prix V6-3.8L VIN 2 (2004)
16. Disconnect the evaporator tube from the TXV.
17. Remove the evaporator tube from the support clip (1) on the left tender rail.
18. Remove the transaxle fluid filler tube.
19. Disconnect the wire harness electrical connector on the top of the left shock tower.
20. Disconnect the wire harness electrical connector from the A/C pressure sensor.
21. Remove the evaporator tube from the vehicle.
22. Remove the A/C pressure sensor.
23. Remove and discard the O-ring seals and seal washers.
INSTALLATION PROCEDURE