Grand Prix V6-3.8L VIN 2 (2004)
6. Install the evaporator tube to the TXV.
7. Install the evaporator tube to TXV nut (1).
Tighten
Tighten the nut to 27 N.m (20 lb ft).
8. Install the heater hoses to the support bracket.
9. Install the transmission shifter cable to the retainer above the heater hoses.
10. Connect the receiver dehydrator to the evaporator tube.
11. Install the A/C line coupling to the evaporator tube and receiver dehydrator tube (1).
12. Install the receiver dehydrator mounting bolt (2).
Tighten
Tighten the bolt to 4 N.m (36 lb in).
13. Connect the A/C compressor hose assembly to the evaporator tube.
14. Install the A/C compressor hose assembly to evaporator tube block fitting nut.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
15. Install the brake pressure modulator valve bracket.
16. Install the master cylinder to the brake booster.
17. Install the nuts to the master cylinder
