Grand Prix V6-3.8L VIN 2 (2004)
Backup Light Bulb: Service and Repair
License Lamp/Backup Lamp Bulb Replacement
LICENSE LAMP/BACKUP LAMP BULB REPLACEMENT
REMOVAL PROCEDURE
1. Open the rear compartment.
2. If replacing the licence lamp bulbs, preform the following steps:
-
Remove the licence lamp bulb/sockets (2) by rotating the sockets counterclockwise.
-
Pull the license lamp bulbs from the sockets.
3. If replacing the backup lamp bulbs, preform the following steps:
-
Remove the backup lamp bulb/sockets (1) by rotating counterclockwise.
-
Pull the backup lamp bulbs from the sockets.
INSTALLATION PROCEDURE
1. If the licence lamp bulbs were removed, preform the following steps:
-
Press the license lamp bulbs into the sockets.
-
Install the licence lamp bulb/sockets (2) by rotating the sockets clockwise.
2. If the backup lamp bulbs were removed, preform the following steps:
-
Press the backup lamp bulbs (1) into the sockets.
-
Install the backup lamp bulb/sockets by rotating clockwise.
3. Close the rear compartment.