Grand Prix V6-3.8L VIN 2 (2004)
5. Remove the following parts from the steering column shaft:
5.1.
The cam orientation plate (5)
5.2.
The turn signal cancel cam assembly (4)
5.3.
The upper bearing spring (3)
5.4.
The upper bearing inner race seat (2)
5.5.
The inner race (1)
Installation Procedure
1. Install the following parts onto the steering column shaft:
^
Lubricate the inner race (1) with GM P/N 12377900 (Canadian P/N 10953529)
^
Install the inner race (1)
^
The upper bearing inner race seat (2)
^
The upper bearing spring (3)
^
Lubricate the turn signal cancel cam assembly (3) with GM P/N 12377900 (Canadian P/N 10953529)
^
Install the turn signal cancel cam assembly (4) onto the steering shaft assembly
^
The cam orientation plate (5)
