pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Trim Height Inspection Procedure|Page 1248 > < Trim Height Inspection Procedure|Page 1246
Page 3
background image

3. Adjust the camber (1).

Tighten the strut-to-knuckle nuts to 120 Nm (89 ft. lbs.). 

4. Lower the vehicle.

Rear Toe Adjustment 

1. Loosen the jam nut at the rear wheel spindle rod (rear).

2. Adjust the toe to the proper setting by turning the adjusting nut. 

Notice:  Refer to Fastener Notice in Service Precautions.

Trim Height Inspection Procedure|Page 1248 > < Trim Height Inspection Procedure|Page 1246