Grand Prix V6-3.8L VIN 2 (2004)
1. Install the cooler pipe/hose to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Connect the power steering return pipe/hose to the steering gear.
Tighten the fitting to 27 Nm (20 ft. lbs.).
3. Connect the power steering pressure pipe/hose to the steering gear.
Tighten the fitting to 27 Nm (20 ft. lbs.).
4. Install the wiring harness clip to the cooler pipe/hose.
5. Install the cooler pipe/hose to the clips on the steering gear.
6. Install the cooler pipe/hose to the retaining clip on the frame.
7. Lower the vehicle.
8. Fill the power steering system.
9. Bleed the power steering system.
10. Inspect the power steering system for leaks.
