Grand Prix V6-3.8L VIN 2 (2004)
EGR Tube: Service and Repair
Exhaust Gas Recirculation (EGR) Outlet Pipe Replacement
EXHAUST GAS RECIRCULATION (EGR) OUTLET PIPE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the air cleaner intake duct.
2. Remove the exhaust gas recirculation (EGR) outlet pipe bolt (2) from the intake manifold.
3. Remove the EGR outlet pipe nut (3) from the EGR valve inlet adapter pipe (1).
4. Remove the EGR valve outlet pipe (1).
INSTALLATION PROCEDURE
1. Install the EGR valve outlet pipe (1).
NOTE: Refer to Fastener Note in Service Precautions.
2. Install the EGR outlet pipe bolt (2) to the intake manifold.
Tighten
Tighten the bolt to 25 N.m (18 lb ft).
3. Install the EGR outlet pipe nut (3) to the EGR valve inlet adapter pipe.
Tighten
Tighten the nut to 25 N.m (18 lb ft).