Grand Prix V6-3.8L VIN 2 (2004)
7. Connect the evaporative emissions (EVAP) purge pipe quick-connect fitting (2).
8. Connect the fuel feed pipe quick-connect fitting (1).
9. Inspect and ensure all of the fuel pipe bundle clips and fasteners are properly installed.
10. Install the brake master cylinder to the brake booster.
11. Install the air cleaner intake duct.
12. Add fuel and Install the fuel tank filler pipe cap.
13. Lower the vehicle.
14. Connect the negative battery cable.
15. Inspect for leaks.
15.1. Turn ON the ignition for 2 seconds.
15.2. Turn OFF the ignition for 10 seconds.
15.3. Turn ON the ignition.
15.4. Inspect for fuel leaks.
