Grand Prix V6-3.8L VIN 2 (2004)
1. Install the CKP sensor.
NOTE: Refer to Fastener in Service Precautions.
2. Install the CKP sensor studs.
Tighten
Tighten the studs to 30 N.m (22 lb ft).
3. Install the CKP sensor shield (1).
4. Connect the CKP sensor electrical connector.
5. Install the crankshaft harmonic balancer.
6. Lower the vehicle.
7. Connect the negative battery cable.
8. Perform the crankshaft position system variation learn procedure. See: Testing and Inspection/Programming and Relearning
